Genuine Ametek Lamb 3-Stage Tangential Bypass Motor 116136-00 7.2″ 240V

Description

Genuine Ametek Lamb 3-stage tangential bypass vacuum motor – OEM 116136-00. 7.2″ frame, 240V, ~1450W Lamb motor for commercial and central vacuum systems that take this tangential bypass unit.

Also known as / replaces / compatible part numbers

• 116136-00
• 116136

What it does / when to replace

Three blower stages raise sealed vacuum for wand and extraction work. Replace when suction is lost, the motor will not run, brushes are spent, or bearings are noisy after normal service life.

• Loss of sealed vacuum / poor lift
• Motor fails to start or runs rough
• Worn carbon brushes or bearing noise

What’s in the pack

1 × Ametek Lamb 116136-00 motor.

Fitment & care

Match 7.2″ frame, 3 stages, tangential bypass discharge and 240V. OEM figures include ~91.8 CFM @ 2″ orifice, ~5.5 A, ~19,714 rpm, double ball bearings, aluminium mounting brackets. Replace the gasket on install, keep working air clean and dry, and renew brushes with kit 833415-55 when worn. Do not overtighten mounts into the fan casing.

FAQs

Q: What voltage is 116136-00?

A: 240V AC single-phase (not a 120V motor).

Q: Is this a 2-stage or 3-stage motor?

A: Three-stage tangential bypass in the 7.2″ Lamb frame – higher sealed lift than an equivalent 2-stage unit.

If you are unsure if this is the correct part, message us with your model or the number on the old part and we will advise.