Genuine Smeg Dishwasher Lower Spray Arm Bushing 760570371

Description

Genuine Smeg dishwasher lower spray arm bushing 760570371 – the centre sleeve / bush cover that seats and supports the lower spray arm so it spins freely and seals to the water feed.

Also known as / replaces / compatible part numbers

• 760570371

What it does / when to replace

Centres the lower spray arm and prevents leaks at the hub. Replace when the arm wobbles, will not spin, or water escapes at the centre support, reducing wash performance.

• Lower arm not rotating
• Poor cleaning on lower basket
• Leak or spray at the centre hub

What’s in the pack

1 × lower spray arm bushing / centre support. Approx. outer diameter 40 mm, centre hole 12 mm.

Compatible models

BLV2AZ-1, BLV2NE-1, BLV2O-1, BLV2P-1, BLV2R-1, BLV2RO-1, BLV2VE-1, BLV2X-1, DC122B, DC122SS, DC122W, DC123LW, DC132LW, DC136LW, DC146LB, DC146LSS, DC146LW, DDC6, DF14SS, DFC612S9, DFD6121W, DFD6132B, DFD6132X, DI112, DI112-9, DI6012, DI6014, DI612DA9, DI6SS, DWA147W, DWA147X, DWA149S, DWA149W, DWA157B, DWA157W, DWA157X, DWAFI149, DWAFI152T, DWAI149X, DWAI152XT, DWAU147X, DWAU149X, DWAU149XN, DWAU157XT, GDI640X, GDV630X, GDV640XL, LS13B, LS13N, LS13X, LS6148BH9, LS6445BNL, LS6445XNL, LS6447BNL, LS6447XNL, LSA12XD9, LSA13X, LSA642G, LSA6444B, LSA6444X, LSA6445B, LSA6445FX, LSA6445G, LSA6445N, LSA6445X, LSA6446B, LSA6446X, LSA6447B, LSA6447FX, LSA6447X, LSA6448B, LSA6448G, LSA644G, LSA645X, LSA6539X, LSA6544B, LSA6544X, LSA6545B, LSAP6445X, LSAP6448B, LSAP6448X, LSAP6449G, LSP137B, LSP137N, LSP137X, LVF647B9, LVS1249X9, LVS129B, LVS129S, LVS135B, LVS135FX, LVS135SX, LVS137B, LVS137N, LVS137SX, LVS139B, LVS139N, LVS139S, LVS145B, LVS145FX, LVS145SX, LVS147SX, LVSMW129B, LVSU129B, NEPTUNESX, PL313EB, PL313NE, PL313X, PL314NE, PL314X, PL338NE, PL338X, PL6248XD9, PL6445XD, PL6446XD, PL6448XD, PL6545XD, PLA6442X, PLA6445B, PLA6445N, PLA6446B, PLA6446N, PLA6446X, PLA6447X, PLA6448B, PLA6448N, PLA647G, ST112-9, ST113S-9, ST114S-9, ST119-9, ST212-9, ST214-9, ST215-9, ST2FABNE, ST2FABP, ST2FABR, ST2FABRO, ST313, ST314, ST315, ST315L, ST316, ST316L, ST317, ST317AT, ST317L, ST337, ST338, ST338L, ST339, ST339L, ST512, ST513, ST514, ST515, ST537, ST6013, ST6015, ST8647, ST867, STA13X, STA13XL, STA613-9, STA6147-9, STA6245-9, STA6246-9, STA6248-9, STA6248D9, STA6249-9, STA6443, STA6443NL, STA6444, STA6444L, STA6445, STA6445D, STA6446, STA6446D, STA6447, STA6447NL, STA6448, STA6448D, STA6539, STA6539L, STA6544, STA6544L, STA8643, STMW10-9, STMW26-9, STX3C

Fitment & care

Isolate power and remove the lower spray arm, then unclip or unscrew the worn bush and fit the new sleeve so the arm spins freely with a secure seal.

FAQs

Q: Is 760570371 for the lower or upper arm?

A: It is the genuine Smeg lower spray arm bushing / centre support.

Q: What size is the bush?

A: Approximately 40 mm outer diameter with a 12 mm centre hole.

If you are unsure if this is the correct part, message us with your model or the number on the old part and we will advise.