Genuine Zanussi Dishwasher Heater 140002162232 | 1800W Flow-Through

Description

Genuine Zanussi dishwasher flow-through heater 140002162232. This OEM 1800W ventilation / flow-through element (with O-ring) heats wash water on Zanussi dishwashers that use the Electrolux group heater.

Also known as / replaces / compatible part numbers

• 140002162232
• 140002162190

What it does / when to replace

This flow-through (ventilation) heater warms the wash water as it circulates through the sump pump assembly. Fit a replacement if dishes stay cold, the cycle errors on heating, or the old element has failed open or leaked at the O-ring.

• Wash water not heating / poor cleaning results
• Heater-related fault codes or early cycle abort
• Leak at the pump-heater joint (worn O-ring)

What’s in the pack

• 1 x dishwasher flow-through heater with O-ring

Compatible models

ZDS15010WA, ZDS12002WA, ZDS22003WA, ZDN11003XA, ZDV14003FA, ZDV91506FA, ZDV12004FA, ZDV12005FA, ZDV12003FA, ZDF17001XA, ZDF17002XA, ZDT16020FA, ZDT16030FA, ZDT26050FA, ZDF26001WA, ZDF26002WA, ZDF92600WA, ZDF26001XA, ZDF26002XA, ZDF92600XA, ZDF26011WA, ZDF26011XA, ZDF4015, ZDF24001XA, ZDF26003XA, ZDF26003WA, ZDF26004WA, ZDF26004XA, ZDF26020WA, ZDF26020XA, ZDF4016, ZDF26017WA, ZDF26017XA, ZDF26030WA, ZDF26030XA, ZANUSSI ZDF26004XA, ZDF23001WA, ZDF1011, ZDF92300WA, ZDF92300XA, ZDF21001WA, ZDF21001XA, ZDF21001NA, ZDF22001WA, ZDF22001XA, ZDF22002WA, ZDF22002XA, ZDF1012, ZDF22017WA, ZDF22002XA, ZDI26001XA, ZDI26010XA, ZDI26011XA, ZDI26022XA, ZDI26040XA, ZDI22001XA, ZDI6503X, ZDI22002XA, ZDI21001XA, ZDI21001WA, ZDI22001WA, ZDI22003XA, ZDI6504X, ZDT24001FA, ZDT92400FA, ZDT25001FA, ZDT24003FA, ZDT24004FA, ZDT26001FA, ZDT92600FA, ZDT26010FA, ZDT26020FA, ZDT26011FA, ZDTCENTO, ZDT26022FA, ZDT26030FA, ZDT26040FA, ZDT21001FA, ZDT92100FA, ZDT22001FA, ZDT92200FA, ZDT21002FA, ZDT21003FA, ZDT21004FA, ZDT22002FA, ZDT21005FA, ZDT21006FA, ZDT22003FA, ZDT22004FA, ZDT22005FA, ZDT921006F

Fitment & care notes

• 1800W, 230V flow-through heater; approx. height 109 mm, outer diameter 88 mm, inside diameter 58 mm.
• Supplied with sealing O-ring for the pump joint.
• Always disconnect power and water before removing the sump / heater assembly.

FAQs

Is 140002162232 a genuine Electrolux group heater?
Yes. This is the genuine Electrolux / AEG / Zanussi group flow-through dishwasher heater 140002162232 (also cross-referenced as 140002162190).

What power rating is it?
1800W at 230V.

Does it include the O-ring?
Yes – the heater is supplied with the sealing O-ring for the pump joint.

Which brands share this heater?
The same 140002162232 heater is used across Electrolux group dishwashers including AEG, Zanussi, John Lewis and Ikea models that specify this part.

If you are unsure if this is the correct part, message us with your model or the number on the old part and we will advise.